DESTINATION INPUT AND ROUTE GUIDANCE
(d) Detour setting
While the route guidance is operating,
you can change the route to detour
around a section of the route where a
delay is caused by road repairs, an ac-
cident, etc.
"Route"
1. Touch the
"Detour"
2. Touch the
82
switch.
3. Select the switch below to select the
desired detour distance.
"1 Mile (km)", "3 Miles (km)" or "5 Miles
(km)": Touch one of these switches to start
the detour process. After detouring, the
system returns to the original guidance
route.
"Whole Route": If you touch this switch,
switch.
the system will calculate an entire new
route to the destination.
2U070c