Sony PWS-100RX1 Help Manual page 14

Help Guide
NETWORK RX STATION
PWS-100RX1 / PWS-110RX1 / PWS-110RX1A
Structure of the File Transfer Screen
The File Transfer screen is used to configure settings for transferring clips from a camcorder to an FTP server. It is used
to specify the clips to transfer and to control transfer jobs.
Source area
Displays the devices for file transfer in list view.
[Proxy Clips] tab
Displays a list of proxy clips stored on the device selected in [Source]. Select clips to transfer by placing a check mark in
the checkbox beside each clip.
Transfer button: Adds the selected clips to the transfer job list.
[High-res. Clips] tab
Displays a list of high-resolution clips stored on the device selected in [Source]. Only clips recorded in parallel (proxy
clips recorded simultaneously) are displayed. Select clips to transfer by placing a check mark in the checkbox beside
each clip.
Transfer button: Adds the selected clips to the transfer job list.
[Job List] tab
Displays a list of clip transfer jobs executed on the [File] tab, and the current transfer status.
Delete: Deletes the selected job from the list.
Clear Completed Jobs: Deletes jobs after completion of transfer to an FTP server from the list.
Ver.1.11 or later
14