INTERIOR EQUIPMENT
GARAGE DOOR OPENER
The garage door opener is manufactured under license
R
from HomeLink
and can be programmed to operate
garage doors, estate gates, security lighting, etc.
(a) Programming the garage door opener
14G015–1
" 1 Buttons
2 Indicator light
The garage door opener has 3 buttons and can be
programmed to operate 3 separate devices.
1. Decide which one of the 3 buttons you want to program.
Push and hold down the button until the indicator light begins
to flash. While holding this button, follow steps "2" and "3".
2. Bring the hand held garage door opener within about 1 in.
(25 mm) of the button being programmed and push the button
on the hand held garage door opener. The signal from the
hand held garage door opener is sent to the vehicle's opener.
86