Epson EH-TW7100 User Manual page 61

Configuration Menu
Function
Image En- 4K Enhancement
*1
hancement
Image Preset Mode
Frame Interpolation
Deinterlacing
Noise Reduction
MPEG Noise Reduction
Super-resolution
Detail Enhancement
Advanced Gamma
RGBCMY
Power Con- High, Medium, ECO
sumption
Auto Iris Off, Normal, High Speed
Reset Yes, No
*1
Only when an HDMI1 or HDMI2 image signal is being input.
*2 Settings are saved for each type of input source or Color Mode.
Menu/Settings
On, Off
Off, Preset 1 to Preset 5 Select the settings prepared in advance as
Off, Low, Normal, High Adjusts the smoothness of movement of
Off, Video, Film/Auto
Fine Line Adjust, Soft
Focus Detail
Strength, Range
2, 1, 0, -1, -2, Custom
Reset
R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
60
Explanation
You can project at a doubled resolution.
the settings for Frame Interpolation, De-
interlacing, Noise Reduction, MPEG
Noise Reduction, Super-resolution, and
Detail Enhancement.
the image.
(This can only be set when Image Pro-
cessing is set to Fine or when receiving
480i, 576i, or 1080i signal input from the
HDMI1 or HDMI2 ports.)
Converts the signal from interlaced (i) to
progressive (p) using a method appropri-
ate for the image signal.
•
Off: This is ideal for dynamic motion im-
ages.
•
Video: This is ideal for viewing general
video images.
•
Film/Auto: Performs the optimal conver-
sion for film, CG, or animation input sig-
nals.
Adjusts the roughness of the image.
Smoothes out rough images in MPEG for-
mat.
Adjusts the amount of enhancement for
complicated images and backgrounds.
Creates a more emphatic texture and ma-
terial feel of the image.
*2
, Performs gamma adjustments. You can
select a raw value or adjust using a custom
value. p.42
s
Adjusts the Hue, Saturation, and Bright-
ness for each R, G, B, C, M, and Y color.
p.41
s
You can set the lamp brightness to one of
three settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image.
Resets the adjustment values of Image set
in the current Color Mode to the default
settings.
p.38
s