Advertisement
Caution: Never use the heat feature without the proper attachment.
To reduce the risk of electric shock, this appliance has a polarized
plug (one blade is wider than the other). This plug will fit in a pola-
rized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician
to install the proper outlet. Do not change the plug in any way.
1. This unit is powered by and comes equipped with a UL
approved cord. Always make sure the unit is set to the OFF
position before inserting the plug into a 120V electrical outlet.
2. Massage: To turn the unit on, slide the black ON/OFF switch,
located along the top of the unit's handle, up. Slide the switch
up one position for the low-intensity setting and up two posi-
tions for the high-intensity setting. To turn the unit off, slide
the switch to the OFF position.
3. Massage with Thermal Heat: Locate the two red (heat)
attachments. Attach to the massage heads by turning clock-
wise to secure. Slide the red HEAT button up for heat. Allow
a few minutes for heat to fully activate. To turn the heat off,
slide the switch to the OFF position.
HF768 IM_v2 0307.indd 12
Operation
12
7/3/07 12:00:14 PM
Advertisement
