Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Plantronics Habitat Soundscaping
Summary of Contents for Plantronics Habitat Soundscaping
- Page 1 Enclosed Waterfall Installation Guide INSTALLATION + MAINTENANCE...
-
Page 2: Table Of Contents
Enclosed Waterfall What you need for installation 3 What’s in the box 3 Uncrate the waterfall Waterfall overview Installation 6 First-time operation Lighting operation (optional) General operation: Valve overview 12 Troubleshooting Surface cleaning and maintenance 14 Quarterly water maintenance 15 6-Month water maintenance 15 Yearly water maintenance Yearly component replacement... -
Page 3: What You Need For Installation
Enclosed Waterfall What you need for installation • 4 people to help move and position waterfall • Distilled water • 14 gallons of distilled water for 8 x 4 ft. waterfall • 18 gallons of distilled water for 9 x 5 ft. and 10 x 5 ft. waterfalls REQUIRED Distilled water is absolutely required no tap water, no spring water. -
Page 4: Uncrate The Waterfall
Enclosed Waterfall Uncrate the waterfall Uncrate the Your waterfall ships inside of a wooden crate to protect the waterfall shipping from damage. container Your container indicates which side is the front of the waterfall. 1. Position the package so that the front is facing towards the ceiling. 2. -
Page 5: Waterfall Overview
Enclosed Waterfall Waterfall overview Quick disconnects Spray bar HEADER WATERFALL PANEL Primary control Water pump valve Fill valve valve (intensity) Water pump Drain valve LED light fixture BASE VIEW FROM TOP UV sterilizer lamp housing UV outlet valve UV inlet valve CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING. -
Page 6: Installation
Enclosed Waterfall Installation Position the Use a platform dolly under each end of the waterfall to move the waterfall waterfall into position easily. Take the waterfall off the dollies and slide into its final position. Level the If the waterfall is not level, use shims to level the waterfall. waterfall 1. - Page 7 Enclosed Waterfall Installation 2. Wearing gloves or holding the bulb with a cloth (avoid touching the bulb; oils from your skin will reduce the bulb lifespan), align the center groove on the bulb with the pin on the inside of the ballast.
- Page 8 Enclosed Waterfall Installation 1. Ensure the drain valve is closed (perpendicular to pipe). Drain VIEW FROM REAR 2. Connect the fill insert spout and funnel (supplied) into the fill valve. 3. Open the fill valve (parallel to pipe). CAUTION Protect your waterfall and make sure to add the water treatment before running for the first time.
-
Page 9: First-Time Operation
Enclosed Waterfall First-time operation Double-check Ensure the valves are in the following positions: valve position Valve Position Drain valve Closed (perpendicular to pipe) Primary control valve Open (parallel to pipe) Water pump valve Open (parallel to pipe) Fill valve Closed (perpendicular to pipe) UV inlet valve Open (parallel to pipe) UV outlet valve... - Page 10 Enclosed Waterfall First-time operation Adjust the flow Two valves control the flow of water and must be adjusted to balance the flow at the top and base of the panel. Primary control valve VIEW FROM REAR UV inlet valve Adjust the primary control valve to control the water flow •...
-
Page 11: Lighting Operation (Optional)
Enclosed Waterfall Lighting operation (optional) The optional lighting fixture is installed in the base, just below the enclosed acrylic waterfall panel. Remote control Your unit includes an infrared lighting remote control. For best performance, stand close to the waterfall and aim the remote control down towards the lighting fixture in the base. -
Page 12: General Operation: Valve Overview
Enclosed Waterfall General operation: Valve overview Primary control valve: Modifies the intensity of waterfall. This valve controls the water flow through the spray bar. UV inlet valve: Controls the water flow through the UV sterilizer and to the fountain feature at the base of the enclosed panel. UV outlet valve: Keep open (parallel to pipe) unless you are servicing the UV sterilizer. -
Page 13: Troubleshooting
Enclosed Waterfall Troubleshooting Symptom Problem Solution Uneven water Dry spots on panel Water flow is too low. Adjust the primary flow control valve to increase flow to the spray bar. Pump is loud/ There is not Fill panel with more distilled water if the has sucking enough water water level is less than 4”... -
Page 14: Surface Cleaning And Maintenance
Enclosed Waterfall Surface Cleaning and Maintenance Cleaning acrylic CAUTION Do not use Windex® or any ammonia-based cleaning product. It will damage the waterfall’s acrylic surface. CAUTION Use only a clean microfiber cloth to wipe the acrylic surface. Other materials may damage the surface. Use a clean microfiber cloth to remove blemishes such as fingerprints and dust. -
Page 15: Quarterly Water Maintenance
Enclosed Waterfall Quarterly Water Maintenance Check water level every three months and refill with distilled water if the water level is less than 4” above the base lid when waterfall is powered on. REQUIRED Distilled water is required. Do not use tap water or spring water. 6-Month Water Maintenance 1. -
Page 16: Yearly Water Maintenance
Enclosed Waterfall Yearly Water Maintenance For optimum performance, replace the water with fresh distilled water and water treatment annually. REQUIRED Distilled water is required. Do not use tap water or spring water. Drain the 1. Disconnect power to the waterfall waterfall 2. -
Page 17: Yearly Component Replacement
Enclosed Waterfall Yearly component replacement CAUTION Disconnect all cables from power when servicing the waterfall. Pondmaster UV Sterilizer ® UV sterilizer bulb (replace yearly) • For optimum performance, replace bulb once every year. • It should remain on 24 hours per day throughout the year. •... -
Page 18: Component Replacement
Enclosed Waterfall Component replacement Pump Because you are using distilled water inside of an enclosed waterfall, (replace as your waterfall pump requires little maintenance; however should needed) your pump fall outside of warranty, you will need to replace it. To replace the pump: You will need: towels, bucket, plumbers tape 1. -
Page 19: Glossary
Enclosed Waterfall Glossary • Base The stainless steel enclosure that holds the plumbing assembly and optional lighting fixture. • Base lids The base lids conceal the base. To prevent damage to stainless steel, remove and replace the lids using suction cup glass holders. •... -
Page 20: Specifications
Enclosed Waterfall Specifications Enclosed • Clear acrylic, enclosed panel waterfall waterfall • Low maintenance unit • 39” LED color changing RGB lighting with remote control (optional) • Ultraviolet sterilizer to keep water clean • Silent pump operation • No plumbing required Oase Profinaut ®... -
Page 21: Safety Certifications
Enclosed Waterfall Safety Certifications Oase Profinaut 6000 Waterfall Pump ® Oase Neptun 2600 Waterfall Pump ® Certification Record Certification Record Class CSA File Customer Number Class CSA File Customer OASE GmbH 3851-81 215573 Number Aquamax 1600 SF 0.75 1600 10 ft, 6 in. Tecklenburger Strasse LIQUID PUMPS-Certified to US 161,... - Page 22 Enclosed Waterfall Listing Constructional Data Report (CDR) Safety Certifications 1.0 Reference and Address Report Number Original Issued: 29-Aug-2012 Revised: 4-Sep-2012 100816416DAL-001 39” LED lighting fixture UL Standard for Safety for Luminaires, ANSI/UL 1598 and CAN/CSA C22.2#250.0, Third Model # HE-YLL-032-0.5M-ETL Standard(s) Edition, Issued: Sep 17, 2008, Revised: Jan 11, 2010 Guangzhou Huayao Electronics Co.
- Page 23 Enclosed Waterfall Safety Certifications Pondmaster UV Sterilizer ® Model # UPC 02940 CAUTION: WHEN SERVICING YOUR WATER FEATURE MAKE SURE THAT YOU DISCONNECT ALL ELECTRICAL AND LIGHTING. Midwest Tropical Inc • 3420 West Touhy Ave • Skokie, IL 60076 USA • Phone: (847)679-6666 • Fax: (847)679-6669...