FujiFilm instax mini 70 User Manual page 44

Problems
The picture is blurred.
The subject in the
EN
viewfinder has shifted in
finished print.
Information for traceability in Europe
Manufacturer: FUJIFILM Corporation
Address, City: 7-3, Akasaka 9-Chome, Minato-ku, Tokyo
Country: JAPAN
Authorized representative in Europe:
FUJIFILM EUROPE GMBH
Address, City: Dusseldorf Heesenstrasse 31, 40549
Country: Germany
44
Possible Causes
1 Picture was not permitted to
develop without touching, pressure
being applied or other interference
once it ejected from the camera.
2 The picture did not come out
smoothly.
● The shooting distance is too
close to the subject.
Solutions
1 Do not press onto or fold the picture.
2 Do not block the film exit with your finger.
● See page 38 for notes on using Macro Mode.
Information for FUJIFILM in the United States
FUJIFILM North America Corp.
200 Summit Lake Drive
Valhalla, New York 10595, USA
Information for FUJIFILM in Canada
FUJIFILM Canada Inc.
600 Suffolk Court, Mississauga, Ontario L5R 4G4