Use In A Car - CONCORD Proton Manual

_ USE IN A CAR
• Move the backrest on the CONCORD PROTON baby carrier to its lowest
position (flat).
• Adjust the carrying handle to position
• The baby carrier must only be placed on the rear seat of the car. There are
three ways to install the baby carrier: in the centre, using the diagonal belts
of the two outer seats, or on one of the outer seats using the outer and a
centre diagonal belt. You can only secure the baby carrier with two diagonal
belts running in diametrically opposed directions (such as on the two outer
seats on the car's rear seat bench). We recommend when installing the
baby carrier on one of the two outer seats that it should be positioned such
that the child's head is pointing towards the centre of the car and is
therefore as far as possible from the car door.
42
P2 (vertically upright).
43