Nsg - D-Link DIR-878 User Manual

DIR-878 AC1900 MU-MIMO Wi-Fi Gigabit Router
User Manual

NSG

On the Advanced / NSG page, you can enable the NSG service. This service allows authorized
access to the Internet for users of your corporate or public wireless network.
To enable the NSG service, move the Enable switch to the right and click the APPLY button. Then
go to the Wi-Fi / Basic Settings page and create an additional wireless network. To do this, click
the ADD WI-FI NETWORK button. On the opened page, specify the relevant parameters and
move the Enable NSG service switch to the right. Click the APPLY button.
In order to access the Internet, users of the additional wireless network should be identified via the
NSG service. To do this, follow the next steps:
1. Connect your wireless device to the router's additional wireless network. If a password is
needed to connect to the network, fill in the relevant field.
2. In the opened window, enter the user telephone number in the Your mobile number field
and click the Next button.
Figure 102. The page for a user identification via the NSG service. Entering a user telephone number.
Figure 101. The Advanced / NSG page.
Page 130 of 191
Configuring via Web-based Interface