Beverage cooler for built-in module ecbim17 (10 pages)
Summary of Contents for Kettler SVEN Champion 7043-190
Page 1
Owner’s Manual Model Number 7043-190 M a d e i n G e r m a n y Thank you for purchasing our high quality KETTLER product. If you have any questions or concerns regarding this product, please contact us: KETTLER International, Inc.
Page 2
All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge in this process is used to constantly improve and develop our products. In order to offer our cus- tomers the very best in product quality, we reserve the right to make technical changes at any time.
Page 3
Instructions for Assembly The fastening material required for each assembly step is sho- Carefully read these assembly instructions before beginning wn in the diagram inset. Use the fastening material exactly as with the work itself. The individual steps are additionally ex- instructed.
Page 7
Ensure that it cannot slip or tilt over. To do this, the braces for the frame must be bent slightly to the side. Pro- ceed with care when doing this.
Page 9
Carry out steps 5–8 for the second half of the table. Again, ensure that the table cannot slip or tilt over!
Page 10
Handling Folding the table halves down: press the left-hand tip lock. Hold the ta- ble firmly with one hand, press the right-hand lock and lower the table-half slowly into position. Never allow it to drop down! Folding the table halves up: press the locking lever up and lift the ta- ble half upwards.
Page 11
Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated on the order by adding the words „with fastening material“. For parts, please contact us at: KETTLER International, Inc. E-mail parts@KETTLERUSA.COM P.O.Box 2747 Tel: 757-427-2400 ext.
Page 12
Spare parts drawing In case of complaint, please state this control number.