Electric Chainsaw - Echo CS 2100 Operating Instructions Manual

Electric Chainsaw

Introduction to the Operating Instructions
These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in
accordance with the regulations. The Operating Instructions contain important information on how to use the machine
safely, correctly and economically. Observing this information will help increase the reliability and working life of the
machine. The Operating Instructions must always be at hand when the machine is being used.
They must be read and observed by every person dealing with the machine, whether operating, servicing or trans-
porting it.
In addition to the Operating Instructions and the applicable rules of the prevention of accidents valid in the country
of use and on site, the generally recognised rules on working safely and correctly must be observed as well as the
accident prevention rules of the relevant professional associations.
Technical Data
The devices are manufactured in accordance with the provisions of DIN EN 60745-2-13 and fully comply with the
provisions of the German Equipment and Product Safety Act.
Model
Rated Voltage
Nominal Frequency
Fuse (time lag)
Rated Output
Nominal current
Guide Bar mm
Cutting length
Speed
Weight
Oil
All models with automatic chain lubrication and mechanical chain brake and rundown brake.
The type designation of the chain you will find on the type plate.
Class of Protection:
Interference Suppression:
Information on noise emission in accordance with "Machine Noise Information Ordinance 3. GPSGV and Machinery
Directives, Annex I, Section 1.7.4 f.
Noise emission values EN 60745-2-13:
Vibration values in accordance with EN 60745-2-13:
Attention: This chain saw is only intended for cutting wood !!!
Important instructions for your personal safety
A) General safety instructions
Attention: You run danger of injuring yourself if
you use the chain saw incorrectly. It is imperative
that you read these Operating Instructions and
follow the instructions given.
KSE 2400 (CS 1800)
V~ 230
Hz 50
A 16
W 2400
A 11,1
350
mm 340
m/sec ca. 12
kg 4,3
ml 200
II/ DIN-EN 60745/ VDE 0740
according to EN-55014
2400 (CS 2100)
230
50
16
2400
11,1
400
380
ca. 12
4,4
200
Sound Pressure Level L
Weighted acceleration handle max. 6,1 m/ s
Attention: Noise protection ! Please observe the lo-
cal regulations when operating your device.
Noise emission information in accordance with the
German Equipment and Product Safety Act (GPSG) and
the EC Machine Directive: the noise pressure level at
the place of work can exceed 80 dB(A). In such cases
the operator will require noise protection (e.g. wearing of
ear protectors).
GB-1
Translation of the original Operating Instructions
ENGLISH
90 dB (A)
[K=3,0 dB(A)]
pA
2
[K=1,5 m/s
2
]