Standard Horizon VHF/FM Marine Handheld Transceiver HX600S Owner's Manual page 36

to 12 characters).
9. After completing your adjustment, press the SQL switch to save the new
setting.
10. Press the PTT key to exit to normal operation.
dUL (DW DISPLAY)
dUL dUL
dUL dUL
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
Default: Special
When "Special" is selected the channel shown on the display is the last channel
the HX600S received a call on. This is a handy feature if you cannot look at
the radio the moment a transmission was received.
LP (LAMP MODE)
LP LP LP
LP
Function: Selects the Lamp illumination method for the LCD and Keypad.
Available Values: Key / oFF / Cnt
Default: Key
Key: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oFF: Disables the LCD/Keypad illumination.
Cnt: Illuminates the LCD/Keypad continuously.
SnL (SCAN LAMP)
SnL SnL
SnL SnL
Function: Enable/Disable the automatic illumination of the lamp when a sig-
nal is received on a channel during Scanning.
Available Values: ON / OFF
Default: OFF
SCn (SCAN DISPLAY)
SCn SCn
SCn SCn
Function: Selects the display mode while scanning.
Available Values: Normal / Special
Default: Normal
When this menu is set to "Normal," the channel numbers during scan will be
shown scrolling on the display. When Special is selected the channel num-
bers on the display do not change unless a call was received. The channel
shown is the last channel that was received.
SCr (SCRAMBLER (Requires optional FVP-31))
SCr SCr
SCr SCr
Function: Enable/Disable the Voice scrambler.
Available Values: ON / OFF
Default: OFF
Note: This Menu Item is ignored when using Marine Channels 16 and 70.
Page 34 HX600S