to 12 characters).
9. After completing your adjustment, press the SQL switch to save the new
setting.
10. Press the PTT key to exit to normal operation.
dUL ( DW DISPLAY )
dUL
dUL
dUL
dUL
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
Default: Special
When "Special" is selected the channel shown on the display is the last channel
the HX500S received a call on. This is a handy feature if you cannot look at
the radio the moment a transmission was received.
LP ( LAMP MODE )
LP
LP
LP
LP
Function: Selects the Lamp illumination method for the LCD and Keypad.
Available Values: Key / oFF / Cnt
Default: Key
Key: Illuminates the LCD/Keypad for 5 seconds when any key is pressed.
oFF: Disables the LCD/Keypad illumination.
Cnt: Illuminates the LCD/Keypad continuously.
SnL ( SCAN LAMP )
SnL
SnL
SnL
SnL
Function: Enable/Disable the automatic illumination of the lamp when a sig-
nal is received on a channel during Scanning.
Available Values: ON / OFF
Default: OFF
SCn ( SCAN DISPLAY )
SCn
SCn
SCn
SCn
Function: Selects the display mode while scanning.
Available Values: Normal / Special
Default: Normal
When this menu is set to "Normal," the channel numbers during scan will be
shown scrolling on the display. When Special is selected the channel num-
bers on the display do not change unless a call was received. The channel
shown is the last channel that was received.
dt dt dt dt dt ( DUAL WATCH MODE )
Function: Selects dual or tri-watch as desired.
Available Values: d- (Dual Watch) / t- (Tri Watch)
Default: d-
HX500S
Page 27