Pioneer VSX-D711-K Service Manual page 81

Display
1
SIGNAL AUTO SB
DIGITAL DIGITAL
ANALOG DTS
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current
component:
AUTO
Lights when AUTO signal select is on
SB (VSX-D811S only)
Depending on the source, this lights when a signal with
surround back channel encoding is detected.
DIGITAL
Lights when a digital audio signal is detected.
2 DIGITAL
Lights when a Dolby Digital encoded signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS encoded audio signals is
detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate
decoding of a DTS signal.
2 DIGITAL
3
When the Standard mode of the receiver is on, this lights to indicate
decoding of a Dolby Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on, this lights to indicate
Pro Logic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of
the analog input signal.
6 DIRECT
Lights when source direct playback is in use. This function
bypasses all tone, balance, Advanced Surround, and Dolby
Surround effects.
7 MIDNIGHT
Lights during Midnight listening.
2 3 4
DIGITAL
PROLOGIC
Neo:6
ADV.SURR.
11 12 13
VSX-D711-K, VSX-D711-S
5 6 7 8
ATT DIRECT MONITOR
Re-EQ MIDNIGHT STEREO
LOUDNESS MONO
14
8 MONITOR
Lights when MONITOR is selected.
9 RF ATT
Lights when the RF ATT is on.
‡
10 EON and
‡
The indicator lights to inform you that the currently tuned station
carries the EON data service. When the EON mode is set, the EON
indicator lights, but during actual reception of an EON broadcast
the EON indicator will flash.
RDS
Lights when an RDS broadcast is received.
11 Character display
12 Neo:6 (VSX-D811S only)
Lights during NEO:6 processing
13 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround modes has been
selected.
14 LOUDNESS
Lights when LOUDNESS has been selected.
15 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being received in auto stereo
mode.
MONO:
Lights when the mono mode is set using the
MPX button.
TUNED:
Lights when a broadcast is being received.
16 Master volume level
Shows the overall volume level. ---dB indicates the minimum level,
and −0 dB indicates the maximum level.
Depending on your level settings for each channel, the maximum
level can range between –10 dB and –0 dB.
17 Speaker indicator
Shows the speaker system currently in use.
9 10
RFATT EON
TUNED RDS
SP A B
dB
15
16 17
81