Samsung POWER VISION M500 User Manual page 167

Sprint power vision phone
Hide thumbs Also See for POWER VISION M500:
Table of Contents

Advertisement

Camcorder (to switch to Video mode. See "Recording
Videos" on page 152 for details.)
Setting the Camera Self-timer
To activate the self-timer:
1.
From camera mode, select Options (
2.
Highlight Self-Timer and press
3.
Highlight the length of delay you want the timer to use
(5 Seconds or 10 Seconds) and press
4.
Press Capture (
timer. (The timer countdown will be displayed in the
upper right portion of the main LCD.)
5.
Get ready for the picture. (When the timer is started,
the phone will begin to beep and the timer numbers
turn red when there are only three seconds left.)
To cancel the self-timer after it has started:
Press
Using the Zoom
This feature allows you to zoom in on an object when you
take a picture. Depending on your resolution settings, you
can adjust the zoom up to four levels.
Note:
Zooming is unavailable when the image resolution is set to
1.3MP: 1280 x 960 pixels.
Section 2I: Using the Built-in Camera
) when you are ready to start the
.
).
.
.
143

Advertisement

Table of Contents
loading

Table of Contents