Listening To Your Ipod - HoMedics SoundSpa Fusion SS-6510B-AV Instruction Manual And Warranty Information

Sound machine, alarm clock radio, dock for ipod
Table of Contents

Advertisement

Available languages

Available languages

When you want to connect a different size iPod, remove the insert from
the SoundSpa Fusion and replace with the correct size insert. To remove
dock insert, place fingernail in slot on insert (Fig 3) and gently pull up. You
must always use the appropriate size insert for your iPod. You may contact
HoMedics Consumer Relations at 1-800-466-3342 to order the correct insert
for your iPod.
Note: Make sure you are using the correct insert for your iPod and that it
is properly docked in the SoundSpa Fusion. Failure to do so may damage
your iPod.
WARNING:
INSERT AND PIN CONNECTOR ARE DESIGNED FOR
APPLE iPOD MUSIC PLAYERS ONLY. ATTEMPTING TO ATTACH
OR FORCE ANY NON- iPOD MUSIC PLAYER INTO THE ENCLOSED
INSERT OR ONTO THE PIN CONNECTOR WILL DAMAGE AND EVEN
DESTROY YOUR DEVICE.
1. Before you begin, remove your iPod from its case or 'skin'. Place insert
in dock, being sure that the two plastic tabs face the front of the unit.
Press insert into place, ensuring it is firmly placed in the dock. Carefully
place your iPod into the docking area so
that the pin connector in the dock is fully
connected to the pin socket on the bottom of
your iPod (Fig. 7).
2. Your iPod will then begin charging, until fully
charged.
Figure 7
8
NOTE: Your iPod will charge even if the POWER button is turned off. The
SoundSpa Fusion only needs to be plugged in for the iPod to charge.
3. To remove/replace an insert, first remove your iPod, then place fingernail
in slot on insert (Fig. 3) and gently pull up.

Listening to Your iPod

1. Press the POWER BUTTON on the SoundSpa Fusion (Fig. 1).
2. Toggle through the AUDIO BUTTON to play the iPod (Fig. 1).
The iPOD ICON will appear on the LCD display on the right side of the
clock, to indicate that the iPod mode has been selected.
Note: When the iPod is docked and in standby mode, it will
automatically begin playing once the iPod mode is selected on the
unit.
3. Press the PLAY/PAUSE button on your iPod to pause play;
press play again to resume play.
4. Turn the VOLUME KNOB (Fig. 1) on the unit to adjust the system volume.
5. Press the
or
on your iPod to go to the next or previous track.
6. To turn unit off, press the POWER BUTTON. The iPod will
continue charging in the dock.
9

Advertisement

Table of Contents
loading

Table of Contents