(10.6) Shutting Down The Mower; Disconnecting The Mower From The Tractor - Alamo Industrial Hydro 88 Operator's Manual

10.6 Shutting Down the Mower
To shut down the mower, first bring the tractor to a
complete stop. Then slow down the mower by reducing
the engine speed before disengaging the PTO. Wait
for all rotating motion to stop before proceeding to drive
or shut down the tractor.
Park the tractor on a level surface, place the
transmission in park or neutral and apply the parking
brake, lower the attached mower to the ground, shut
down the engine, remove the key, and wait for all motion
to come to a complete stop.

11. DISCONNECTING THE MOWER FROM THE TRACTOR

DANGER!
Always shut the Tractor completely down, place the transmission in park, and set the parking
brake before you or anyone else attempts to connect or disconnect the Implement and
Tractor hitches.
To disconnect the rear mower, first extend the tractor
3-point hitch top link to remove tension on the top link
hitch pin. When the pin is loose and easy to rotate,
remove the pin from the mower. Next remove both lower
hitch pins.
HYDRO 88 & 96 08/03
© 2003 Alamo Group Inc.
OPERATION
(S3PT-15)
Operation Section 4-26