Hifonics Atlas Series Owner's Manual page 28

HF-HLA
You can simplify the installation of the high level speaker
connections, if you use the separately available hi-to-lo
adaptors HF-HLA from HiFonics. You may find the adaptors
at your car audio retailer.
With the HF-HLA you just need to connect the bared speaker
cables in the regarding ports and connect the RCA jacks with
LINE IN on the amplifier.
Please ensure the correct polarity of the connections.
Usually the "+" positive cables are red or dark grey,
With one HF-HLA adaptor you are able to connect
one channel pair, this means for a 4-channel amplfier
you need two adaptors.
HF25WK
PREMIUM WIRE KIT
• 25 mm Powercable, 5 m,
2
• 25 mm Groundcable, 1 m,
2
• Mini-ANL Fuseholder with 100 A Fuse
• Twisted, triple-shielded Stereo-RCA-cable,
silvered metal jacks, included remote-wire,
directional-ground-looped, 5 m
HF35WK
PREMIUM WIRE KIT
• 35 mm Powercable, 5 m,
2
• 35 mm Groundcable, 1 m,
2
• ANL Fuseholder with 150 A Fuse
• Twisted, triple-shielded Stereo-RCA-cable,
silvered metal jacks, included remote-wire,
directional-ground-looped, 5 m
HFP5RCA
PREMIUM RCA KABEL
• Verdrilltes, dreifach-geschirmtes Stereo Cinch-Kabel,
versilberte Metall-Stecker, integrierte Steuerleitung,
richtungsgebunden, 5 m
28
ADDITIONAL ACCESSORIES
SPEAKER CABLES
–
R
+
+
L –
TO THE LINE IN OF
THE AMPLIFIER