80 Electrical installation
•
Dimensions between point of cable entry and terminals
See
ACS580MV Wiring Diagram
•
Conventions for cross-references and device identification
•
Terminal designations
Preparing the cable entry and the cables
Determining the cable length
1
Determine the required length of a cable between the point of entry and the connection
point inside the cabinet.
2
Cut the cable to the required length before connection.
Routing the cables
•
Route the cables as illustrated through the provided cable duct to the customer
terminals or fieldbus modules in the control compartment.
1
Duct for auxiliary and control cables (1)
for information on: