Warranty certificate Name of owner: Hearing care professional: Hearing care professional address: Hearing care professional phone: Purchase date: Warranty period: Month: Model: Serial no.:...
Page 4
International warranty Your charger is covered by an international limited warranty issued by the manufacturer for a period of 24 months from the date of delivery. This limited warranty covers manufacturing and material defects in the device itself, but not in accessories such as batteries, cables, power supplies, etc.
Page 5
Introduction to this booklet This booklet guides you on how to use and maintain your new charger. Please read the booklet carefully, including the Warning section. This will help you get the most out of your new charger. If you have additional questions about the charger, please contact your hearing care professional.
Intended use The charger is intended to recharge a hearing aid that contains rechargeable batteries in a home environment. The product is intended to be used together with the given hearing solution. This charger is intended for use by adults and children older than 36 months.
Table of contents Package contents Temperature conditions Charging time Caring for your charger Power the charger via other sources General warnings Trouble shooting guide Conditions of use...
Package contents The box of the charger for miniRITE T R hearing aids contains the following items: Power plug Charger m i n i R I T E H e a r i n g A i d s i n - t h e - E a r R e c e i v e r H e a r L i n k HearLink...
Page 10
Charger − What it is and does Charging ports For hearing aids when charging USB connector Insert into power plug or other suitable power sources Power cable Supply power LED light Status indicator for charger ON/OFF Power plug* For power socket * Power plug will vary from country to country...
Temperature conditions Temperature Charging condition Below +5°C No charging due to low (+41 °F) temperature +5°C to +35°C Best charging condition. (+41°F to +95°F) Charging will take up to 3 hours. +35°C to +40°C Prolonged charging. (+95°F to +104°F) Charging will take up to 4 hours.
Page 12
Preparing the charger Connect to power source 1. Insert the USB connector into the power plug. 2. Insert the power plug into a power socket. The charger will turn on automatically. Start up Charger is on When the charger is connected to power, the LED will turn green.
Page 13
Charging the hearing aids Place hearing aids Charging in charger Place the hearing The LEDs on the hearing aids in the aids will turn on when the charging ports as hearing aids are correctly shown in the placed in the charger. picture.
Charging time Fully charge your hearing aid before first time use. Charge your hearing aid every night. This ensures that you start your day with a fully charged hearing aid. Charging time can vary depending on the remaining capacity of the battery. If your hearing aid is completely drained, the normal charging time is: 3 hours...
Page 15
The charging process will automatically stop when the battery is fully charged. Leave the hearing aid in the charger when not being worn. Remember to keep the charger connected to a power source. Note that charging time may vary between left and right hearing aid.
Caring for your charger Always make sure that the charger is dry and clean before use. Keep the charging ports clean by using a dry cloth. Do not use water or cleaning fluids to clean the charging ports. Store your charger in a dry location, e.g. in the bedroom, rather than in the bathroom or kitchen.
Power the charger via other sources It is possible to power the charger from other sources with a USB port. Ensure that the power source is USB 2.0 compliant, minimum 500 mA output. Examples of sources · Power bank · PC ·...
General warnings You should familiarize yourself fully with the following general warnings before using your charger for your personal safety and to ensure correct use. Consult your hearing care professional if you experience unexpected operations or events with your charger. Usage of charger ·...
Page 19
Heat · The charger must never be exposed to extreme heat, e.g. left inside a parked car in the sun. · The charger must not be dried in microwave ovens or other ovens. Connection to external equipment · The safety of the charger when connected to external equipment (via auxiliary input cable, USB cable, or directly), is determined by the external equipment.
Trouble shooting guide Symptom Possible causes The charger LED remains turned off when the charger The charger is not plugged in is connected to power The charger LED The hearing aid or charger is shows long red too warm blinks The charger LED The charger is too cold repeatedly shows...
Page 21
Solutions Verify that the power supply is connected correctly. Make sure that the power source complies with specifications indicated on page 17. Move the charger and hearing aid to a location with a temperature between +5 ° C to +40 ° C (+41 °F to +104 °F) Move the charger and hearing aid to a location with a temperature between +5 ...
Conditions of use Operating Temperature: conditions +5 ° C to +40 ° C (+41 °F to +104 °F) Relative humidity: 15 % to 93 % , non-condensing Atm press.: 700 hPa to 1060 Storage and Temperature and humidity transportation should not exceed the conditions following limits for extended periods during...
Page 24
Description of symbols used in this booklet or on the packaging label Warnings Text marked with a marking symbol must be read before using the product. Manufacturer The product is produced by the manufacturer whose name and address are stated next to the symbol. Indicates the medical device manufacturer, as defined in EU Directives 90/385/EEC, 93/42/EEC and 98/79/EC.
Page 25
REACH Declaration: REACH requires Philips Hearing Solutions to provide chemical content information for Substances of Very High Concern (SVHC) if they are present above 0.1% of the article weight. No substances on the REACH SVHC list applicable at the time of manufacturing is present in Product HearLink.
Page 26
Directive EMC (2014/30/EU) and LVD (2014/35/EU). Declaration of Conformity is available at the manufacturer. SBO Hearing A/S Kongebakken 9 DK-2765 Smørum Denmark www.hearingsolutions.philips.com Waste from electronic equipment must be handled according to local regulations. E2105 197494/UK...
Page 27
< > 8,15 mm Placeholder for FSC logo < 15 mm >...
Page 28
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by or for and is sold under the responsibility of SBO Hearing A/S, and SBO Hearing A/S is the warrantor in relation to this product.