Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19b
Advertisement
Table of Contents
Summary of Contents for Harbor Freight Tools FRANKLIN Series
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing SAVE THIS MANUAL.
-
Page 2: Important Safety Information
These carry important safety information. 3. Use as intended only. If unreadable or missing, contact Harbor Freight Tools for a replacement. 4. Inspect before every use; do not use if parts are loose or damaged. 9. The warnings, precautions, and instructions discussed in this instruction manual cannot 5. - Page 3 Functions Fixed Jaw Sliding Jaw Slide Knob Grip Rear Leg Lock Lever Vise Switch Pedal Release Rear Pedal Foot Lock Lever Front Leg Locks Front Legs Rear Foot Item 64827 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Setup and Operation Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 3. Slide the Rear Leg up fully so that the Setup slot in its side is not exposed, then swing the Rear Leg Lock Lever closed.
-
Page 5: After Use
6. Pull one of the Front Leg Locks inward, 4. Slide the Vise Switch down to the lock position. and swing the nearby Front Leg out fully. 5. Step on the Pedal repeatedly to Release the Front Leg Lock and make sure that secure the workpiece. -
Page 6: Maintenance
3. Pull the Pedal Release out and swing the 5. Slide the Rear Leg up into the indent and swing Pedal up against the Work Station. the Rear Leg Lock Lever closed to secure it. Pedal Release Pedal Rear Leg Rear Leg Lock Lever Figure L... - Page 7 Parts List and Diagram Part Description Part Description Part Description Cap Screw Braking Rocking Handle Tension Spring (B) Pawl Big Flat Washer 4 Rivet 3×8 Fixing Seat Asm. Tension Spring (C) Pedal Asm. Round Pin Pressure Spring Hex Bolt M6 X 30 Cylinder Compression Spring Sliding Pin Hex Bolt M8 X 36...
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.