Siemens Desigo Touch Series Installation And Commissioning Instructions page 10

10 / 22
Siemens
Building Technologies
Tap Manual Manual.
1.
Complete all Complete all fields.
2.
Finish with Next. Finish with
3.
---> The server connection page opens. > The server connection page opens.
Enter IP address or URL of the PXG3.W100. Enter IP address or URL
4.
---> This ought to be defined in XWP prior to this action. > This ought to be defined in XWP prior to this action. > This ought to be defined in XWP prior to this action.
Complete with Finish. Complete with
5.
---> The process may take a few seconds. The > The process may take a few seconds. The page with the location defin
tion opens. opens.
Enter both Location and Password. Enter both
6.
---> This is not the user password, and it must also not match the user
password! password!
7. Tap OK OK to finish.
---> This concludes > This concludes "Binding". The main view for the desired project is di
played within a few seconds. played within a few seconds.
Desigo Touch and Web Desigo Touch and Web
Commissioning – Touch panel commissioning – Step-by-step Commissioning
page with the location defini-
password, and it must also not match the user
. The main view for the desired project is dis-
CM111029en_04
2014-08-15