3Com Baseline Switch 2900 Series Getting Started Manual page 39

CPU Clock Speed
Memory Type
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...1
The last line asks whether you want to enter the Boot ROM menu. The system waits one second for
your response.
The system has two startup modes: normal startup and fast startup. The normal startup mode
requires a little longer time than the fast startup mode because of more self-test operations.
By default, the system starts up in fast mode and the waiting time here is one second. If you set the
startup mode to normal, the waiting time is five seconds. The following section describes the
setting of the startup mode.
If you press Ctrl + B within one second, the Boot ROM menu is displayed.
BOOT MENU
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
6. Enter BootRom upgrade menu
7. Skip current system configuration
8. Set BootRom password recovery
9. Set switch startup mode
0. Reboot
Enter your choice(0-9):
Table 4-2 describes the fields above.
Table 4-2 Description on the fields
Item
1. Download application file to flash
2. Select application file to boot
3. Display all files in flash
4. Delete file from flash
5. Modify BootRom password
: 333MHz
: DDR2 SDRAM
: 128MB
: 128MB
: 001
: Ver.A
: 000ef2002900
Download the application file to the flash memory
Select the application file to boot
Display all files in the flash memory
Delete files from the flash memory
Modify the Boot ROM password
4-6
Description