Cleaning The Front Of The Machine; Maintenance Programmes; Rinse The Appliance; Rinse The Milk Pipework - Miele CVA 7440 Operating And Installation Instructions

Cleaning and care
 Clean the interior and the inside of
the machine door by hand with a
clean and slightly damp cloth/
microfibre cloth. After cleaning, wipe
the interior and machine door dry
using a soft cloth.
 Put all the parts back in place,
including the drip tray.
 Close the machine door.
Cleaning the front of the
machine
If soiling is not removed promptly, it
could cause the surface to alter or
discolour.
Remove any soiling on the front of
the machine straight away.
Make sure that water cannot get
behind the display.
Clean the front of the machine after
descaling. If possible, wipe up any
spillages of descaling agent
immediately.
Tip: Before cleaning the control panel,
open the machine door to prevent
accidental operation.
 Clean the front of the machine with a
clean and slightly damp cloth/
microfibre cloth. After cleaning, wipe
the surfaces dry using a soft cloth.
Tip: You can also use a Miele microfibre
cloth to clean the front.
62

Maintenance programmes

The coffee machine has maintenance
programmes for:
– Rinsing the machine
– Rinsing the milk pipework
– Cleaning the milk pipework
– Degreasing the brew unit
– Descaling the machine
Run the relevant maintenance
programme when the prompt to do so
appears in the display. You can also
start maintenance programmes at any
time so that the coffee machine does
not prompt mandatory cleaning at an
inconvenient time.
Tip: To save you having to empty the
drip tray too often, you can place the
maintenance container under the
central spout.
Opening the Maintenance menu
 Touch the  sensor.
You can now select a maintenance
programme.

Rinse the appliance

If you have made a coffee drink, the
coffee machine will rinse the coffee
pipework automatically before
switching off. You can also start the
Rinse the appliance

Rinse the milk pipework

If you have made a drink with milk, the
coffee machine will rinse the milk
pipework automatically after a few
minutes. You can also start the
function manually.
milk pipework
function manually.
Rinse the