Pressure Regulator Adjustment - Sullair TS20C User Manual

SECTION 6
Figure 6-7: Pressure Regulator Adjustment
100/150HP
Rebuild Kit P/N 250019-453
Pressure Regulator 250017-280
6.10 PRESSURE REGULATOR
ADJUSTMENT
Refer to Figure 6-7. Start the compressor and adjust
the service valve to maintain service air pressure at
approximately 1 psi over its rated pressure. Turn the
inlet valve regulator adjusting screw until 100psi is
showing on the pressure gauge. Lock the adjusting
screw in place with the locknut. The regulator is now
properly set.
TS20C USER MANUAL
ADJUSTMENT
SCREW
Figure 6-8: Pressure Regulator Adjustment
200/250HP
PRESSURE
REGULATOR
02250014-608
02250046-568
02250052-358
02250186-328
REBUILD KIT P/N
041742
02250055-911
048409
02250187-734
117