(See Location andMounting section on Page 3). BRIDGING THE AMP TO MONO The D-200,0100, D60. Class-A-50 and Class-A-40 amplifiers can be bridged to deliver high power into a single channel. (Refer to the Specifications listing at the end of this manual for power ratings.) Bridging requires a simple internal adjustment.
Page 3
a good idea to bench test your system before mounting the components. If It’s 1 Z-volt you have a power source, you can connect and test all the components outside the car. Or you can connect them inside the car before screwing them down.
DESIGN FEATURES Only premium parts are used in ycur Soundstream amplifier, such as metal-film resistors, gold-plated input connectors, and immersrble Each output device is individually rated at 125 watts. The case is equipped with generous heat sinks, and thermal protection is provided. Input sensitivity able to match any tuner/deck -the amplifier can even be used as a power booster.