Starting Supersign Manager; Logging In - LG NC1000 Owner's Manual

SuperSign Manager

Starting SuperSign Manager

Starting SuperSign Manager
Open the program by clicking Start > Programs > SuperSign Manager > SuperSign Manager.

Logging In

Note
● When SuperSign Manager is initially run, the default user ID is set as Administrator, which you can
change later.
Attention
● You must remember the new ID and password you set because they will be needed for the next login.
● If you lose your password, it cannot be restored. You will need to initialize the administrator account.
● To do this, enter "1234567890init" in the password field.
● Your ID and password can be up to 20 characters each.
When SuperSign Manager starts, a log-in window appears
1
as shown below.
If you start SuperSign Manager for the fi rst time, you
2 need to enter a user ID and password of your choice.
Click OK to log into SuperSign Manager.
If you click Cancel, your logging to SuperSign
3 Manager will be canceled, and the program will
terminate automatically.
31