Cleaning Instructions - Panasonic WH-MDC05H3E5 Operating Instructions Manual

Mono bloc, air-to-water heatpump
Hide thumbs Also See for WH-MDC05H3E5:
Table of Contents

Advertisement

Available languages

Available languages

Cleaning instructions

To ensure optimal performance of the system, cleaning has to be carried out at regular intervals.
Consult an authorised dealer.
• Disconnect the power supply before cleaning.
• Do not use benzine, thinner or scouring powder.
• Use only soap (
pH7) or neutral household detergent.
• Do not use water hotter than 40 °C.
Mono bloc Unit
• In case of a power supply failure or pump operating failure, drain the system (as suggested in the figure below).
H
Water filter
• Clean the water filter at least once a year. Failure to do so may cause the filter to clog up, which may lead to system
breakdown. Consult an authorised dealer.
Inspection
• In order to ensure optimal performance of the units,
seasonal inspections on the units, water filter and field
wiring have to be carried out at regular intervals. Consult
an authorised dealer regarding maintenance.
• Clear any obstruction on the air inlet and outlet vents of
the mono bloc unit.
For extended non-use
• Do not switch off the power supply. Switching off the
power supply will stop the automatic water pump
operation and will cause jamming in the water pump.
24
ACXF55-14600_FC0817-0.indb 24
ACXF55-14600_FC0817-0.indb 24
When water is idle inside the system, freezing up is very likely to happen which could
damage the system.
• Do not obstruct the air inlet and air outlet vents, it may cause low performance or
breakdown. Please remove obstacles to assure the ventilation.
• During winter, please clean and remove the snow near mono bloc unit so that the snow
does not cover the air inlet and air outlet vents.
<H
Non serviceable criteria
Disconnect the power supply
then please consult an authorised dealer under the
following conditions:
• Abnormal noise during operation.
• Water/foreign particles have entered the Remote
Controller.
• Circuit breaker switches off frequently.
• Power cord becomes excessively warm.
7/19/2017 2:05:34 PM
7/19/2017 2:05:34 PM

Advertisement

Chapters

Table of Contents
loading

Table of Contents