Replacing The I/O Board; Procedure; Post-Requisites - Dell 3000 Series Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Slide the I/O-board cable into the connector on the I/O board and close the latch to secure the cable.
2. Adhere the tape to secure the I/O-board cable to the I/O board.
3. Turn the I/O board over.
4. Align the screw hole on the I/O board with the screw hole on the palm-rest assembly.
5. Replace the screw that secures the I/O board to the palm-rest assembly.
Post-requisites
1. Follow the procedure from step 3 to step 7 in "Replacing the
2. Replace the keyboard.
3. Follow the procedure from step 4 to step 5 in "Replacing the
4. Replace the battery.

Replacing the I/O board

computer. After working inside your computer, follow the instructions in
base cover".
optical drive".
22
After
Replacing the I/O board 37