Selecting The Effect To Suit The Source; Changing The Input Level Of The Sound From Connected Components - Sony DAV-DZ280 Operating Instructions Manual

Selecting the Effect to
Suit the Source
You can select a suitable sound mode for movies
or music.
Press SOUND MODE repeatedly during
playback until the desired mode appears in
the front panel display.
• "AUTO": The system automatically selects
"MOVIE" (the MOVIE indicator lights up) or
"MUSIC" (the MUSIC indicator lights up) to
produce the sound effect depending on the
source.
• "MOVIE": The system provides the sound for
movies. The MOVIE indicator lights up.
• "MUSIC": The system provides the sound for
music. The MUSIC indicator lights up.
Note
• When you play a Super Audio CD, this function does
not work.
• You cannot operate these setup items when you
connect headphones to the unit.
Changing the Input Level
of the Sound from
Connected Components
Distortion may occur when you listen to a
component connected to the EURO AV T
OUTPUT (TO TV) jack on the rear panel, or to
the AUDIO IN jack on the front panel.
Distortion is not a malfunction and will depend
on the component connected.
To prevent distortion, reduce the input level on
the unit.
1
Press FUNCTION +/– repeatedly until
"TV" or "AUDIO" appears in the front
panel display.
2
Press SYSTEM MENU.
3
Press X/x repeatedly until
"ATTENUATE" appears in the front
panel display, then press
4
Press X/x to select a setting.
• "ATT ON": You can attenuate the input
level. The output level is changed.
• "ATT OFF": Normal input level.
5
Press .
The setting is made.
6
Press SYSTEM MENU.
The system menu turns off.
or c.
73
GB