Before Voice Dialling - Sony Ericsson Z520i User Manual

Calling
Voice commands can only be saved in the internal
phone memory, not on the SIM card. When recording,
make sure that you are in a quiet environment and
try to use names that are distinct from each other,
%
28 Tips when recording and using
voice commands.

Before voice dialling

You must first activate the voice dialling function
and record your voice commands. Phone numbers
must be in your list of contacts before adding voice
commands. An icon next to the contact name
indicates a voice command is associated with
that contact.
To activate voice dialling
and record names
1
} Settings }
the
} Voice dialling } Activate } Yes } New voice
and select a contact.
2
If the contact has more than one number,
use and to view the numbers. Select
the phone number to which you want to add
the voice command. Now you are going to record
a voice command such as "John mobile" for the
phone number you selected.
26
This is the Internet version of the user's guide. © Print only for private use.
} Voice control
General tab
3
Instructions appear. Wait for the tone and
say the command that you want to record.
The voice command is played back to you.
4
If the recording sounds ok
} No
If not and repeat step 3.
5
To record another voice command for a contact
} New voice } Add
again and repeat steps 2-4
above.
Caller name
You can choose whether you want to hear
the recorded contact name when you receive
a call from that contact.
To turn the caller name on or off
} Settings } General
the
} Play caller name.
Voice dialling
You can voice dial by saying a pre-recorded voice
command. Start voice dialling from standby using
the phone, a portable handsfree, a Bluetooth headset
or by saying your magic word.
} Yes.
} Voice control
tab