Bosch WAN Series Instruction Manual And Installation Instructions page 17

Descaling
Descaling should not be necessary if
the detergent is measured out correctly.
However, if it is required, follow the
manufacturer's instructions for the
descaling agent. Suitable descalers can
be obtained via our website or from our
after-sales service. ~ Page 42
Detergent drawer and housing
After the washing cycle, detergent or
fabric softener residues may remain in
the detergent drawer or on its housing.
To remove residues:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Remove the insert.
2.
a) Push the insert upwards from
below with your finger.
b) If the measuring aid
detergent is used, pull it upwards.
* depending on the model
for liquid
*
Cleaning and maintenance
Clean the detergent drawer and
3.
insert with water and a brush, and
dry it. Clean the inside of the
housing as well.
Fit the insert and lock it into place.
4.
a) Push the cylinder onto the guide
pin.
b) If the measuring aid* for liquid
detergent is used, slide it
forwards, fold down and click into
place.
en
35