Table of Contents
Advertisement
5 Release button
Press this button to take a picture.
Using the special-purpose lens (VCL-1205BYS):
Pressing this button instantaneously stops down
the iris to the current setting, and captures the
image to memory.
Using other lenses: If the camera is in standby mode,
pressing this button instantaneously captures the
image to memory. If not in standby mode, the iris
is first stopped down to the current setting (which
takes several seconds), and then the image is
captured to memory.
6 USER button
When using the Control Software, press this button to
recall user files (USER1, USER2, and USER3).
Recalling one of these files automatically sets up the
system according to the settings in the file. You can
also use this button to switch from one user file to
another.
For details of the Control Software, see Chapter 5.
7 E-ZOOM (electronic zoom) button
Pressing this button zooms in at a 2:1 ratio on the
center of the live image (E-ZOOM mode). Use this
button to focus quickly. Pressing the button once more
exits the E-ZOOM mode, and returns to the normal
image.
Note
In the E-ZOOM mode, only the FOCUS FAR/NEAR
and ZOOM T/W buttons operate.
8 IRIS +/– buttons
These adjust the lens iris.
IRIS +: Pressing this button increases the numerical
value of f-stop (i. e. stop down the iris).
IRIS –: Pressing this button decreases the numerical
value of f-stop (i. e. open up the iris).
9 ZOOM T/W (telephoto/wide angle) buttons
These control the zoom.
ZOOM T: Pressing this button zooms in.
ZOOM W: Pressing this button zooms out.
17
Chapter 1 Overview
Advertisement
Table of Contents
