Table of Contents
Advertisement
2
Installation and Activation
This chapter describes how to install EMO to your mobile device and activate the
application. Note that only one device can be used for each email account. When you
wish to change to a new device, the old device should be uninstalled first.
2.1
Installing EMO
Please follow these steps to install EMO to your mobile device:
1. Copy the EMO installation package (.SIS file) to the device. There are several
ways to do this:
a. Send it over a Bluetooth connection from your PC (make sure Bluetooth
is enabled both on the sending and receiving device)
b. Store it onto a memory card that the device is able to read
c. Install it over a cable using your device management software (the
cable usually comes with your mobile device)
d. Send it over an infrared link from your PC
2. Start installation and press Install. Locating the file depends on how you
transferred the file:
a. If you sent the file to your phone via Bluetooth or infrared, it appears in
the Inbox messaging folder (with your received SMS)
b. If you have the file on the memory card or transferred it via cable, open
your phone's File Manager program and find the file from your disk or
memory card
3. If you receive a message stating the installation file cannot be verified, you can
select Install anyway. The message comes because your installation has not
been digitally signed. If your Ericsson Enterprise reseller has provided the file
to you, it is safe to install.
4. You will receive a prompt requesting confirmation to install. Press Install.
Figure 2. Supplier Info
5. Select the language to be used and press Install. The language selection
screen shows only if your installation package contains several languages, and
the preferred language set on your device is not available in the installation
package.
6/1553-ANF 901 16/1 Rev C
Ericsson Mobile Organizer 5.1
Enterprise Edition
User Guide for S80
5(26)
Advertisement
Table of Contents
