Summary of Contents for ESI FlexCharge4 Series
- Page 1 FlexCharge4 ™ assembly and operation instructions personal desktop power Model #FCH4-DSK-WHT Model #FCH4-DSK-BLK...
-
Page 2: Safety Instructions/Warning
FlexCharge4 Safety instructions Safety instructions/warning Always read the safety instructions carefully. • Do not install near heat sources such as radiators, heat registers stoves, or other equipment (including amplifiers) that produce heat. • Unplug the unit during lightning storms or when unused for extended periods of time. -
Page 3: Parts And Tools
FlexCharge4 Parts and tools M4 Allen key (1) M4x14 Panhead screw (4) M3x12 Panhead screw (2) Caution: Hand-tighten screws only. Additional tools required • Phillips screwdriver • Power drill with 1/8” drill bit (under-desk mounts only) There are three ways to mount the FlexCharge4 power module: •... - Page 4 FlexCharge4 Desk clamp Step #2 attach bracket/clamp assembly to power module • Position the assembly in the desired location and clamp securely to the worksurface by tightening the triangle knob. • Plug the power cord into an AC outlet You are now ready to use the two AC power outlets and two USB charging ports on the FlexCharge4.
- Page 5 FlexCharge4 Desk clamp continued Step #2 attach bracket assembly to power module • Route the power cord through the opening in the top bracket. • Attach the top bracket to the rear of the power module using the two M3x12 panhead screws. Tighten securely. power module M3x12 2”...
- Page 6 FlexCharge4 Grommet mount Desk clamp (option 3) With this method, the top bracket is turned upside- down so that it can be mounted to the underside of the worksurface with M4x14 wood screws. As with the other methods, the power module is mounted to the bracket using two M3x12 panhead screws.
-
Page 7: Additional Features
FlexCharge4 Additional features Step #4 attach power module to bracket • Route the power cord through the opening in the top Bracket bracket. Top Bracket • Attach the power module to the bracket using the two M3x12 panhead screws. Tighten securely. power module Bottom You are now ready to use the two AC power outlets and... - Page 8 LIMITED WARRANTY ESI warrants this product to be free from defects in manufacturing for a period of one year from the date of original purchase. This warranty extends only to the original purchaser, and does not apply if the product has been damaged or fails to function properly as a result of misuse, abuse, modification, alteration, or improper cleaning or maintenance.