Related Manuals for MB QUART MB QUART MDR2.0
Summary of Contents for MB QUART MB QUART MDR2.0
- Page 1 MDR2.0 USER MANUAL AM/FM ● Bluetooth ● USB ● iPhone/iPod ® IPX5-Rated Media Receiver...
-
Page 2: Pre-Installation Checklist
PRE-INSTALLATION CHECKLIST Thank you for purchasing the MB Quart MDR2.0 Multimedia Receiver with AM/FM, USB, iPhone/iPod control and Bluetooth audio streaming. Please take a few minutes to review the user manual before attempting installation and operation. Additional support documentation can be found at MBQUART.com or by emailing support@maxxsonics.com. -
Page 3: Wiring And Installation
WIRING & INSTALLATION REAR PANEL DETAIL... -
Page 4: Install The Unit
WIRING & INSTALLATION INSTALL THE UNIT Please note: This unit requires a minimum 3-3/4” mounting depth which includes space for the electrical/speaker plugs and any A/V input and output connections. 1. Cut or utilize a mounting opening 7”(H) x 2” W). 2. -
Page 5: Front Panel Controls
FRONT PANEL CONTROLS... - Page 6 FRONT PANEL FUNCTIONS (BY MODE) KEYS RADIO AUX IN BT MUSIC ACTION Power ON Power ON Power ON Power ON /BAS/TRE/BAL/FAD/E /BAS/TRE/BAL/FAD/ /BAS/TRE/BAL/FAD/ /BAS/TRE/BAL/FAD/ Q/LOUD/BEEP Short EQ/LOUD/BEEP EQ/LOUD/BEEP EQ/LOUD/BEEP /CLOCK(12/24)/P_VO /CLOCK(12/24)/ /CLOCK(12/24)/ /CLOCK(12/24)/ L/CT(sync/indep) P_VOL P_VOL P_VOL /AREA/DX/STEREO Long Power OFF Power OFF Power OFF Power OFF...
-
Page 7: Operation
OPERATION POWER AND BASIC ADJUSTMENTS Turn the Unit ON or OFF Press POWER button to turn the unit ON. When the unit is switched on, press and hold button for 2 seconds to switch the unit OFF. A “GOOD BYE” message is displayed to POWER confirm power down. - Page 8 OPERATION BASIC ADJUSTMENTS (Continued) Setting Adjustments (AM/FM Source ONLY) The AM/FM source adds additional settings to the adjustment menu Press and release POWER button, then repeat after cycling the sound adjustments for the setting menus: BEEP ON/OFF- CLOCK 12/24 - P_VOL – CT SYNC or CT INDEP – AREA USA or AREA EUR– DX or LOC – STEREO or MONO ...
- Page 9 OPERATION AM/FM RADIO Receive a Radio Station There are 3 FM station groups - FM1, FM2 and FM3. There are 2 AM station groups - AM1 and AM2. To select a radio station group, press the MODE button to select the radio mode. Next press BAND button to select desired group (FM1, FM2, FM3, AM1 or AM2).
- Page 10 OPERATION USB, iPhone/iPod & AUX Sources USB Sources When an USB source such as a thumb drive or portable media player is inserted to the USB port on the front panel of the unit, it supports playback of MP3 and WMA files automatically. ...
- Page 11 OPERATION BLUETOOTH SOURCES Bluetooth Pairing You must first pair a Bluetooth-enabled device to stream music to your unit. Select “search” or “discover” on the Bluetooth device while the unit is in the BT MUSIC mode. “MDR2.0” should appear in the list of available devices. Select “MDR2.0.” ...
-
Page 12: Specifications
SPECIFICATIONS GENERAL Power Supply Requirements: DC 12 Volts, Negative Ground Current Drain: 10 Ampere (max.) Maximum Output Power: 4 x 16 watts into 4 Ohms @ 14.4V DC Preamp Output Voltage: 5.0V (with AUX, USB, or AM/FM Source) 6-3/4” (W) x 2” (H) x 3-3/4” (D) Chassis Dimensions Note: Installation depth requires 3-3/4”... - Page 13 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use such marks by MB Quart is under license. All product names, logos, and brands are property of their respective owners. All company, product and service names used in this literature are for identification purposes only.