Turn And Lane-Change; Signals; Cornering Lamps; Interior Lighting - Cadillac CT6 2020 Owner's Manual

Hide thumbs Also See for CT6 2020:
Table of Contents

Advertisement

Turn and Lane-Change

Signals

Move the lever all the way up or down
to signal a turn.
An arrow on the instrument cluster
flashes in the direction of the turn or
lane change.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is completed. If the lever is
briefly pressed and released, the turn
signal flashes three times.
The turn and lane-change signal can
be turned off manually by moving the
lever back to its original position.
If after signaling a turn or lane
change, the arrow flashes rapidly or
does not come on, a signal function
may be inoperative. This vehicle is
equipped with LED lighting. For
replacement of any LED lighting
contact your dealer.

Cornering Lamps

If equipped with cornering lamps, they
automatically come on when all of the
following occur:
The low-beam headlamps are on.
The turn signals are activated or
the steering wheel is at a turning
angle.
The vehicle speed is below 40 Km/
h or (25 mph).
LIGHTING

Interior Lighting

Instrument Panel
Illumination Control
The brightness of the instrument
panel lighting and steering wheel
controls can be adjusted.
: Move the thumbwheel up or
down to brighten or dim the lights.
153

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents