Motorola Talkabout T62 Owner's Manual page 7

Selecting the Channel
The channel is the frequency of the radio uses to transmit.
1. Press Menu/Lock until the channel number starts to
flash.
2. Press or to change the channel. Long press on
these keys allows you to scroll through the channels
rapidly to browse the codes.
3. Press PTT button to exit menu or
continue set up.
Note: Your radio has eight channels by default. In countries where
16 channels are allowed, you can activate Channels 9 to 16 with
the following steps:
1. Press Menu/Lock until the channel number starts to flash.
2. Press and hold down
until you hear a beep and "16 CH" is displayed briefly.
Selecting the Sub-Code
Sub-Codes help minimize interference by blocking
transmissions from unknown sources. Your radio has
121 Sub-Codes.
To set the code for a channel:
1. Press Menu/Lock until the code starts to flash.
2. Press or to select the code. You can hold down the
button to speed up scrolling through the codes.
3. Press the PTT button to exit menu or
continue set up.
Menu/Lock to
and simultaneously for 3 seconds
Menu/Lock to
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other radios
in your group so you can alert them that you want to talk.
Your radio has 20 call tones for you to choose from.
To set a call tone:
1. Press Menu/Lock until the Call Tone
The current call tone setting will flash.
2. Press or to change and listen to the call tone.
3. Press the PTT button to exit menu or
continue set up.
In order to transmit your call tone to other radios, set up the
same channel and Sub-Code on your radio and press
Tone.
Easy Pairing
The Easy Pairing feature allows a group of radio users to
program all their radios to the same Channel and Sub-Code
settings quickly and simultaneously. Any one radio within the
group can be designated as the "Leader's radio" and have
it's Channel and Sub-Code settings transmitted to and
copied by all the other radios in the group (Members' radios).
1. Pick any one of the radios as the "Leader's radio". On this
radio, program the Channel and Sub-Code to the desired
settings.(See "Selecting the Channel" and "Selecting the
Sub-Code" sections in this user manual)
2. To copy the channel and Sub-Code combination to all the
other "Members' radios", press and hold the
the Members' radios until you hear a beep. Release the
button after the beep, and wait for the transmission from
the Leader's radio.
icon appears.
Menu/Lock to
Call
button on
5