Parrot MKi9100 User Manual page 10

Installing the remote
control on the
dashboard
Replacing the
battery
If you want to place the remote control on the dashboard, stick the double-sided
tape located on the flat side of the bracket to fix it against the dashboard. You can
then insert the remote onto the bracket.
WARNING: Once you have stuck the support on the dashboard, wait for
approximately 2 hours to make sure the adhesive tape adheres well.

The remote control only works with a 3V CR2032 battery.

Make sure the battery is correctly positioned before inserting it into the
remote control.
Parrot MKi9100 – User guide
10