Displaying event logging
All events
Select Logging → Event Logging, All events tab.
Ê
In this group, all occurred events are listed.
Default sorting and scope of the listed results
In both tabs, the default sorting is by the time stamp of the events, with the newest event
listed first.
In the All Events tab you can use the Period: field to filter for entries from a certain time.
i
To restrict the number of displayed results, you can filter by the following criteria:
–
Weight of the event (e.g. >=WARNING, >=ERROR, >=CRITICAL)
–
Name of the unit on which the message was issued
–
Component that issued the warning (e.g. M2000, X2000, Sys-Mgmt, cluster or name of
an installed add-on)
–
Message text
i
326
To ensure that the time stamps are consistent, it is required that all units (MU,
SU x86, HNC etc.) are synchronized with an NTP server.
See also
section "NTP server" on page
The currently possible events with messages are listed in the online help of the SE
Manager under "Further information".
Managing logging functions
36.
U41855-J-Z125-3-76