Step 4: Tuning Your Tv To The Vcr - Sony SLV-X827MN Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected your VCR to the TV using the audio/video cable, skip
this step.
1
ON/STANDBY
Press ON/STANDBY to turn on the VCR.
2
Press RF CHANNEL on the VCR.
RF
The factory-preset RF channel appears in the display window.
CHANNEL
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR
picture.
This channel will now be referred to as the video channel.
4
Press RF CHANNEL.
RF
CHANNEL The TV system indicator appears in the display window.
Press PROGRAM +/– to select the desired TV system. If you watch
PROGRAM
the system B/G, select "G." If you watch the system D/K, select
"K."
10
Getting Started
ON/STANDBY
RF CHANNEL
PROGRAM +/–
SLV-X827MN 3-858-297-11 (1)
RF
RF
G