Step 4: Tuning Your Tv To The Vcr - Sony SLV-E780EN/EG Operating Instructions Manual

Step 4
Tuning your TV to the VCR
If you have connected the VCR to your TV using the EURO-AV cable, skip
this step.
1
Press ON/STANDBY to turn on the VCR.
ON/STANDBY
2
Press RF CHANNEL on the VCR.
RF CHANNEL
The factory-preset RF channel appears in the display window.
The VCR signal is output through this channel to the TV.
3
Turn on your TV and select a programme position for the VCR
picture.
This programme position will now be referred to as the video
channel.
4
Press RF CHANNEL.
RF CHANNEL The TV system appears in the display window.
ON/STANDBY PROGRAM +/–
RF CHANNEL
continued
11
Getting Started