Pyle PRMBN200 User Manual

QUICK OPERATION (Continued)
ON/OFF:
This machine has automatic and manual shutdown functions.
Automatic shutdown: This machine has an automatic shutdown function, if the
stop operation time interval of more than set off, the system will automatically cut
off power supply.
Manual Shutdown: Users can use the power switch to turn on or off.
SETUP AND RESIZE
Debug Method: Press the "Clear" button waiting for temperature to 00
1. Temperature = 00 is tightness adjustment: (Factory value=30)
Press "Enter paper" button then into the set state, now press "+, -" button, enter the
required values, press "Enter paper" button again, Setting out the state ,press "Quit
paper" button, Set item switch.
2. Temperature = 01 is feed length adjustment: (Factory value=3) press "+, -" button,
input the required values, press" quit paper" button, set the project into the next
3. Temperature = 02 is Sensitivity adjustment: (Factory value=9)
Press "Enter paper" button then into the set state ,now press "+, -" button, enter the
required values, press "Enter paper" button again, Setting out the state, press "Quit
paper" button, Set item switch
4. Temperature = 03 is Temperature sensor compensation value: (Factory value=O)
Press "Enter paper" button then into the set state ,now press "+, -" button, enter the
required values, press "Enter paper" button again, Setting out the state, press "Quit
paper" button, Set item switch
5. Temperature = 04 is Sensor detection threshold value paperless:
(Factory value = 30) Press "Enter paper" button then into the set state, now press "+,
-" button,enter the required values, press " Enter paper" button again, Setting out
the state, press "Quit paper" button, Set item switch
6. Temperature = 05 is Set off time: (Factory value=60) press "Enter paper"
button then into the set state ,now press "+, -" button, enter the required values,
press "Enter paper" button again, Setting out the state, press "Quit paper" button,
Set item switch
7. temperature =06 is Operation mode setting: (Factory value=O)
Press "Enter paper" button then into the set state ,now press "+, -" button, enter the
required values, press "Enter paper" button again, Setting out the state, press "Quit
paper" button, Set item switch
3
CURRENCY BINDING MACHINE
User Manual
PRMBN200