Sony CS SLV-998HF MX Operating Instructions Manual page 26

Step 3: Hookups (continued)
5
Enter your DSS receiver code number and press
CURSOR
6
Set your DSS receiver
output channel (BOX
OUTPUT CH) to LINE
and press OK.
Automatic clock setting
Once you've set up the VCR, it automatically sets the clock the first time you
turn off the VCR. After that, whenever you turn off the VCR, it checks the
time and adjusts the clock, even for Daylight Saving Time. The VCR sets the
clock by picking up a time signal provided by some TV channels.
If you want to use the timer to record right away, or if the channels in your
areas do not carry time signals, set the clock manually. For details, see page 37.
Note
* To successfully record a program from the DSS receiver, proceed as follows:
- Leave the DSS receiver on all the time.
- Turn off the display (menu screen, channel number, etc.) of the DSS receiver.
- To record or receiver locked channels, unlock the channel before the VCR starts
recording.
- To set pay-per-view programs in the timer setting, order the pay-per-view
program before the VCR starts recording.
- Some programs are copy protected. You cannot record these programs.
26
Getting started
. For details, see page 40.
SET UP
CABLE BOX CONTROL
CABLE MOUSE
BOX CODE NO.
BOX OUTPUT CH
Use
Box CH.
CABLE BOX
ON OFF
-- -- --
CH3
to select CABLE
Then push OK
SET UP CABLE BOX
CABLE BOX CONTROL
CABLE MOUSE ON OFF
BOX CODE NO. -- -- --
BOX OUTPUT CH CH3
Enter your CABLE BOX
Code No. Using 0 - 9 keys
Refer to the Operating
Manual for the Code
SET UP
SET UP is done
Normal display