Table of Contents
Advertisement
8-14. Setting Default Signal Out
Output Channel
Lets you choose the channel used to view the DIRECTV
®
High-Definition Receiver when
connected to the TV from the "OUT TO TV" jack, either channel 3 or, 4. Make sure your TV
is set to the selected channel and that the DIRECTV HD Receiver's Format is set at "Video
1/2".
To set the channel number of the DIRECTV HD Receiver:
1. Press the Menu button on the Remote Control to display the on-screen menu.
2. Scroll down using "
E
" on the remote control.
3. Select the Preference menu by pressing " ".
4. Scroll down to Output Channel using "
".
E
5. Move the highlight to the right with "
".
G
6. Select Channel 3 or 4 and press " " to return to the previous level.
7. Press the Exit button on the remote control to return to TV viewing.
82
Advertisement
Table of Contents
