American DJ Matrix Beam LED User Instructions

American DJ Matrix Beam LED User Instructions

Hide thumbs Also See for Matrix Beam LED:

Advertisement

Quick Links

User Instructions
9/12
Matrix Beam LED
Unpacking:
Thank you for purchasing the Matrix Beam LED by Amer-
ican DJ
. Every Matrix Beam LED has been thoroughly tested and has
®
been shipped in perfect operating condition. Carefully check the ship-
ping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without con-
tacting customer support first.
Introduction:
The Matrix Beam LED is designed as a blinder/cyc
effect or as a matrix chase effect for stages and mobile productons.
This fixture has built-in light chases with the option to create alpha-
betical and numerical characters. The fixture has four different operat-
ing modes; show mode, manual mode, sound-active, and DMX mode.
The Matrix Beam LED has 3 DMX Channel Modes; 1 Channel mode,
4 Channel mode, and 25 Channel mode. The fixture can be used as
a stand alone unit or connected in a master/slave configuration. For
best results use fog or special effects smoke to enhance the beams
projections.
Customer Support:
American DJ
support line, to provide help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking directly
into the light source at all times!
American DJ
- www.americandj.com - Matrix Beam LED Instruction Manual Page 2
®
General Information
provides a toll free customer
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ Matrix Beam LED

  • Page 1 The fixture has four different operat- ing modes; show mode, manual mode, sound-active, and DMX mode. The Matrix Beam LED has 3 DMX Channel Modes; 1 Channel mode, 4 Channel mode, and 25 Channel mode. The fixture can be used as a stand alone unit or connected in a master/slave configuration.
  • Page 2: General Instructions

    Warranty Registration • Always be sure to mount this unit in an area that will allow proper The Matrix Beam LED carries a 3 year (1095 days) limited warranty. ventilation. Allow about 6” (15cm) between this device and a wall.
  • Page 3: Power Supply

    DATA -). This unit is inserted in the female XLR connector of the last Matrix Beam LED has 3 DMX channel modes; a 1 Channel Mode, 4 unit in your daisy chain to terminate the line. Using a cable terminator Channel Mode, and 25 Channel Mode.
  • Page 4: System Menu

    Pin 4 - Do Not Use Not Used Pin 5 - Do Not Use American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 7 American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 8 ® ®...
  • Page 5 Press the UP or DOWN buttons to find your desired show. at least 3 seconds to activate. American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 9 American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 10 ®...
  • Page 6 This function will reverse the display 180º. 1. Press the either the MENU button until “DISP” is displayed, press ENTER. American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 12 American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 11 ®...
  • Page 7: Master/Slave Configuration

    Any unit 1. The Matrix Beam LED has 3 DMX channel modes; 1 Channel can act as a Master or as a Slave.
  • Page 8 188 - 217 SHOW 7 218 - 247 SHOW 8 248 - 255 SOUND ACTIVE American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 15 American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 16 ® ®...
  • Page 9: Channel Mode

    1. Low frequencies (bass) should cause the unit to react to sound. Tapping on the microphone, quiet or high pitched sounds may not activate the unit. American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 17 American DJ - www.americandj.com - Matrix Beam LED Instruction Manual Page 18 ®...
  • Page 10: Warranty

    American DJ, Inc. concludes, after inspection, affects the reliability of Weight: 23 Lbs. / 10.2 kgs. the product; if the product has been repaired or serviced by anyone other than the American DJ, Inc. Colors: Warm White factory unless prior written authorization was issued to purchaser by American DJ, Inc.;...

Table of Contents