SCF424 Chassis Manual
(Your node may differ from those shown in this illustration)
5-5
Removing the Node Cover
Each node has a removable cover which will permit access to the nodes compo-
nents.
Removing the Node Cover
1. Power down the system and remove the power cord from the rear of the
power supply as described in Section 5-2. Remove the node from the chassis
as described in Section 5-3 and place the node on a flat, stable surface.
2. Remove the screws securing the cover to the node, as illustrated above.
3. Lift the cover up and off the node.
Figure 5-6: Removing the Node Cover
5-8