Recording From The Radio - Sony MHC-VX55 Operating Instructions Manual

1
Press TUNER/BAND repeatedly to
select FM or AM.
2
Turn SHUTTLE until it clicks (or
press PRESET +/– on the remote) to
tune in the preset station you want.
Turn counter-
clockwise (or
press PRESET –
on the remote)
for lower preset
numbers.
Preset number*
TUNED
* When only one station is preset, "ONE
PRESET" appears in the display.
To Do this
Turn off the radio Press ?/1.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations
Use manual or automatic tuning in step 2.
For manual tuning, press + or – (or TUNING
+/– on the remote) repeatedly. For automatic
tuning, press and hold + or – (or TUNING
+/– on the remote).
Tips
• You can switch from another source to the radio
just by pressing TUNER/Band (Automatic Source
Selection).
• When an FM program is noisy, press
STEREO/MONO so that "MONO" appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Turn clockwise
(or press PRESET
j
+ on the remote)
for higher preset
J
numbers.
Frequency
MHz
STEREO
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) tape.
?/1
(Power)
4,6
x
1
Press TUNER/BAND to select the
band you want.
2
Turn SHUTTLE until it clicks (or
press PRESET +/– on the remote) to
tune in a preset station.
Turn counter-
clockwise (or
press PRESET –
on the remote)
for lower preset
numbers.
Preset number
TUNED
1
5
DOLBY NR
2
3
Turn clockwise
j (or press PRESET
+ on the remote)
for higher preset
J
numbers.
Frequency
MHz
STEREO
continued
15