Sony MHC-V818 Operating Instructions Manual page 6

Step 1: Hooking up the system
(continued)
4
Set SYSTEM SELECT (color system)
to the appropriate position (PAL or
NTSC), according to your TV.
SYSTEM SELECT
If your TV automatically changes the
color system according to the input
signal:
The factory setting (AUTO) automatically
changes the color system of the video output
according to the color system of the current
VIDEO CD.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
Pictures recorded in the PAL color system will be
stretched vertically and will be displayed with the
upper and lower parts of the picture cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL.
Pictures recorded in the NTSC color system will be
stretched horizontally and will be displayed with
the upper and lower parts of the screen masked in
black.
Note
Be sure to turn off the system before changing the
SYSTEM SELECT setting.
6
NTSC PAL
AUTO
5
Set VOLTAGE SELECTOR to
position of your local power line
voltage (for models with a voltage
selector).
VOLTAGE
6
Connect the power cord to a wall
outlet.
Demo mode appears in the display.
7
Deactivate the demo mode by
pressing DEMO when the system
power is turned off.
The demo mode is also deactivated
when you set the time.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
SELECTOR
-