Rack Installation Specifications For Racks That Are Not Purchased From Ibm - IBM 9008-22L Site And Hardware Planning

Table 78. Environmental and acoustical requirements (continued)
Environment/Acoustical
Temperature, storage
Relative humidity range (non-
condensing)
Maximum altitude
Heat dissipation
Acoustic noise
G8316R RackSwitch specification sheet
Hardware specifications provide detailed information for your IBM BNT RackSwitch, including
dimensions, electrical, power, temperature, environment, and service clearances.
Table 79. Dimensions
Height
43.7 mm (1.72 in.)
Table 80. Electrical
Electrical characteristics
Power requirements
Voltage
Frequency
Maximum thermal output
Phase
kVA
Table 81. Environmental requirements
Environment
Airflow direction
Temperature, ambient operating
Relative humidity range (non-condensing)
Maximum altitude
Heat dissipation

Rack installation specifications for racks that are not purchased from IBM

Learn about the requirements and specifications for installing IBM systems into racks that were not
purchased from IBM.
Learn about the requirements and specifications for 19-inch racks. These requirements and
specifications are provided as an aid to help you understand the requirements to install IBM systems into
racks. It is your responsibility, working with your rack manufacturer, to ensure that the rack that is chosen
meets the requirements and specifications that are listed here. Mechanical drawings of the rack, if
available from the manufacturer, are recommended for comparison against the requirements and
specifications.
70 Power Systems: Site and hardware planning
Operating
10% - 90% RH
1800 m (6000 ft)
1127 Btu/hr
Less than 65 dB
Width
439 mm (17.3 in.)
Storage
-40ºC to +85ºC (-40°F to 185°F)
10% - 90% RH
12190 m (40000 ft)
Depth
483 mm (19.0 in.)
Properties
400 W
100 - 240 V ac
50 - 60 Hz
1365 Btu/hr
1
0.408
Operating
Rear-to-front
0°C - 40°C (32°F - 104°F)
10% - 90% RH
3050 m (10000 ft)
1100 Btu/hr
Weight (maximum)
9.98 kg (22.0 lb)